Skip to content

How To Clean Plexiglass Sneeze Guards?

    Clear plastic barriers can help safeguard the health of employees and customers. It is essential to wash the sneeze guards frequently to clean the area and polish the clear acrylic to ensure that it does not get dirty and appears unprofessional.

    We create sneeze shields according to the requirements of our clients. Our specialization is designing stylish barriers that look elegant and professional. To look great, take these steps to take care of sneeze shields.

    How To Clean Plexiglass Sneeze Guards?

    There is no universal solution to this question since the best method of cleaning Plexiglass Sneeze Guards can differ depending on the kind you have chosen for your Plexiglass Sneeze Guard you are using and the method of cleaning you select.
    However, some guidelines for cleaning Plexiglass Sneeze Guards are to use a gentle soap with warm water. Wipe down the guard using paper towels or a cloth and, occasionally, sanitize the guard using a diluted bleach solution.

    How do you clean Acrylic Plexiglass?

    Because sneeze shields and acrylic shields are employed as an additional layer of protection against physical distancing and are used to block the droplets of others, they must be cleaned of any contaminates and ought to be cleaned frequently. Even though your sneeze protectors might not be touched by staff, customers, or you, they must be maintained daily. However, if they are in frequent contact, you must clean the acrylic plexiglass more often.

    Health Canada has provided us with a list of disinfectants that you can use on their website to help reduce the spread. It is crucial to realize that these products are not intended to clean plastic. They can harm clear acrylic plexiglass. Alcohol and abrasive chemicals are not recommended to clean clear acrylic. Therefore, if you employ abrasive chemicals on your sneeze, guards could cause them to break or become cloudy with time. When these chemicals cause damage to the sneeze guard, and it becomes cloudy, it won’t be as clear and shiny no longer. When this happens, you’ll likely have to be replaced with a sneeze shield.

    How To Clean Plexiglass

    Step 1
    Start by cleaning any dirt or dust from the glass’s surface, but not using your typical duster. Contacting the surface with surface particles with your fingers or cloth could crush them into the plexiglass itself.

    Instead, please use air to remove the dirt either by blowing it across the glass (close the eyes before you begin!) or by using a short blow dryer that is set to the most relaxed setting. Never, ever warm the plexiglass. If you decide to go with the second method, you should hold it at 45°, several inches from the plexiglass, and then run it across the surface.

    Step 2
    Once the dirt has been removed, apply an acrylic cleaner that is not abrasive like Brillianize (buy from Amazon) and Novus No. 1. (buy from Amazon) and onto the one- or two-foot area of glass. (For a readily available alternative, you can use a mixture of moderate dishwashing soap with water that can work well.)

    Once the cleaner is applied, use a soft non-lint microfiber cloth or, as a last resort or a disposable diaper to gently wipe the surface, and be sure to apply only to the area that already has cleaner on it. Continue to apply the cleaner, cleaning it off in smaller sections until you’ve completed your entire area.

    Step 3
    If you’re feeling the need to go all-in, you could wash the cloth, soak the cloth in plain water, and then go over the plexiglass a second time. This isn’t a necessity; however, it can aid in cleaning anything you haven’t. Suppose you can apply water to the surface without creating an accident that could cause slips, for example, using a sprayer nozzle at an unintentional setting in the inner part of the shower enclosure. In that case, you’ll get a better shine. Keep in mind: the less pressure you apply, the more efficient.

    If All Else Fails…

    As you will observe, there are numerous ways to clean your acrylic or plexiglass panels. Most of the time, people can keep their fixtures clean using an abrasive cloth and soapy water. But, particularly in busy locations, the likelihood of damage is higher to occur, so it’s essential to be aware of how you can adequately remove digs or scratches and other imperfections. If you feel that you’re not confident or don’t aren’t skilled enough to properly clean or buff your acrylic yet, check out our vast assortment of custom acrylic displays! From office signs to contemporary podiums, ballot boxes, and many more. At Displays2go, we’re experts at the fabrication of acrylic!

    Leave a Reply

    Your email address will not be published. Required fields are marked *