Did you drop your phone down the bathroom, spill some water on it, or plunge into the swimming pool while it was in your hand? Congrats, you’re a member of the Clumsy Humans Club! Be assured that we won’t be harsh with how you behave. We’ll assist you in escaping this stymied (or damp) condition.
In this blog, We’ll give you seven ways to eliminate water from the speaker on your phone, From the simplest (and not effective) and ineffective to those that are the most inventive (and bizarre). So let’s get started!
What to Do If You Drop Your Phone in Water
Take these steps as soon as you’ve dropped your cell phone into the water:
Take it away to dry location: Disconnect the phone from its source of water without rotating it, shaking the device, or shifting it too much because this can result in the water moving farther into your phone’s internal parts. Place the phone on a dry towel or napkin and let it dry within a space with adequate airflow.
Shut it off: Switch the phone and any wireless connections when you have removed the water from it to prevent the electrical currents, which could cause harm or create a risk to handling. Don’t plug it into.
Please get rid of the case, remove the phone’s case, and dry it using either a paper towel or cloth. Only replace your phone’s case once you’ve entirely dried it, and it’s secure to use again.
Take off the battery and other accessories: Eliminate the battery of your device and any additional internal and external components, such as the SD card, headphones, and SIM cards. SIM card. Pat them dry gently, after which you can place them next to your device so that they can continue drying.
Allow your phone to dry out and drain before proceeding to more thorough water elimination techniques. Wait to touch your phone, change parts or switch off the device until you have removed the most water you can.
How to Remove Moisture From Phones
Although we typically hear about damaged devices due to water, humidity is yet another factor that can cause harm to your phone if appropriate you don’t take care. The most frequent places you’ll see wetness within your phone are inside those charging ports beneath the screen, in the headphone port, and under your camera’s lens.
However, the most terrifying aspect is that you aren’t required to drop the phone into a lake or spill the liquid onto it to get moist. Your phone can get damp in a humid location, in the contents of a steamy bag, inside a plastic bag after raindrops, or after dropping the phone in an aquatic body or accidentally putting it away in the refrigerator.
As a side note, however, can you clean your phone of water without going to a repair facility? It is. This is how you can remove the moisture from phone parts.
Turn it off – NOW!
You should turn it off as quickly as you can.
In the past, phones had batteries that could be removed, and batteries could be removed; flipping them out was the fastest method to remove the battery. Now, we don’t have the option to flip it out and instead need to press your power button.
Do not think that it isn’t damaged simply since your device’s operating. It’s not a good idea to let water in your device. When you turn off the water, reduce the possibility that your phone will be forever damaged due to the short circuit of electricity.
If the phone is shut off, turn the phone off. Avoid powering it up or charging it or anything similar until you’ve completed the drying process.
Empty it
The case and all phone equipment (charger or headphones) should be removed from the phone’s exterior. This is a crucial step for getting the phone’s water since it blocks the water from working its way into the. Get rid of the battery and the SIM card as soon as possible. Even though iPhones do not have batteries that can be removed, certain Android phones do. So you’ll need to look up the model and make of your phone.
Use silica gel packets.
Silica gel packs to help in drying; if you’ve got them on, have them on. These are the tiny bags of beads inside new purses and shoe boxes. They’re made to hold in moisture. Therefore, they’re helpful here.
Put them on the top of your smartphone until it is dry. It is possible to purchase silica gel packets for emergencies, such as the ones below, if you don’t have them at homeThere are 100 packs of silica 2g at just $7 on Amazon(opens in a new tab).
Put the Rice Away
Desiccant substances such as rice be attracted by moisture and soak it up. It’s why it’s often recommended to place wet phones inside a pot of rice cooked in the oven. However, you should avoid making that mistake. Dry and small rice grains may get inside the ports of your phone and cause additional damage. This includes getting stuck inside their ports. If your phone is damp, the rice grains absorb the water, expand, and become stuck inside the phone. If you have silica gels in garments like jackets and shoe boxes, you can use them to dry out your phone.
Waterproof smartphones
With modern technology and improved phone designs, companies are creating smartphones with some degree of water resistance.
However, this doesn’t necessarily mean you can use these phones to dive deep into the sea; it is adequate to handle small splashes of water and rain. The IP certification to resist dust and water lets you take the device in less than 1 millimeter of water for at most 30 minutes. Therefore, if you’re in the market for a phone that can use even in the rain, consider one of these capabilities.
Don’t Shake Your Phone
One of the first actions you could be tempted to do when you realize that your phone is damp is to shake it. This is something other than what you want to do. Shaking your phone with your hands isn’t advisable and will not remove moisture from the charging port. Even if you’re lucky, this won’t be helpful, but in the worst case, the risk is that you’ll cause additional damage to your smartphone.
Use a Vacuum Cleaner
Next, we need to highlight using a cleaner designed for phones. It may seem bizarre, but those with specialized equipment can remove liquids from the phone via the speakers and other ports, which could be challenging to reach using alternative methods. It is also possible to use your automobile or home vacuum cleaner with a tiny nozzle attached.
Dry it out
Wipe your phone clean with a towel or paper towel. Tilt it in a side-to-side motion to permit the water to fall out, or if one is, you can use a dry or wet vacuum cleaner to draw moisture away.
Don’t blow into your phone because it could only force water further into it.
DO NOT: Stick your phone inside the microwave. Do we have to inform you about this?
Do not use a blow-dryer or other method to heat the phone. Apple claims that the iPhone is at its maximum temperature of 113°F. This isn’t very hot.
Is putting your smartphone in rice do the trick? It’s not true. There’s plenty of speculation about rice that’s dry, draining water away. However, research has shown that when you live in a dry area, the most effective method to dry your smartphone is by keeping it air-dry. This technique can be the most efficient when combined with excellent air circulation.