Skip to content

How To Remove A Stripped Screw

    Do you notice that your screwdriver constantly slides while you try to remove the old Screw? Most likely, your Screw’s slots head has been stripped, and the screwdriver has nowhere to hold. The feeling could be that the damaged Screw is fixed. However, there are a lot of solutions to use when screws made of metal and wood won’t move. Learn what equipment and household items can help eliminate that damaged Screw.

    Removal of Stripped Screws From Steel Wood, Plastic What is the reason why the material matters
    Most methods discussed below are applicable if the Screw that is stripped has been embedded in wood, metal or even plastic. Removal of the Screw Every material poses its unique problems.

    Metal screws that have been snagged need to be taken care of, or you could risk scratching or damage. Take extra care when working with the power tools and cutting equipment.
    A screw that is stripped in wood is likely to have a surface that is flush or a little lower than the surface. Hence, an extractor for a stripped screw could be the best option to extract the Screw.
    Plastic is a pretty soft material. A gentle touch is essential to reuse the hole you made in plastic after taking out the Screw. The process of grinding, hammering, or cutting to remove screws can cause the spot to become unusable.
    Whichever materials you’re working with, you’ll require a little strength to get rid of the screws that are stripped. Make sure to use muscular force and perseverance, shifting the Screw just a little of a complete turn at a time. If you don’t, you could break the Screw. This will make the process of removing it harder.

    What is a stripped screw?

    The Screw is stripped once the grooves on the Screw’s head and the screwdriver, whether the Phillips head or a flat screwdriver, have entirely worn out. Your screwdriver, or the drill bit, can’t get into it, allowing it to pull the Screw while it twists.

    There is an instrument called a screw extractor tool that you could use with your drill that does the job perfectly. However, you don’t have to use one. You only need to learn the various methods to eliminate an untidy screw. All the techniques discussed here utilize commonly used items found in the home or garage to pull the stuck Screw removed. One of the advantages of having different methods of getting rid of a damaged screw is that if one doesn’t work for you, then attempt another.


    The problem of losing screws is a major one for anyone who is a repairer. Some screws won’t let you take them out as hard as they may be. The frustration builds, and, in a flash, the once “+” shape has changed into an “O”. We’ve been there for you. This tutorial will guide you through using the rotary tool to take out an unsalvaged screw by cutting a tiny slit inside the Screw’s head, allowing you to pull out the Screw using the flat-head screwdriver.


    • Different Screwdriver
    • Rubber Band
    • Screw Extracting Pliers
    • Superglue
    • Rotary Tool

    You just need to pull it out!

    Based on how the Screw lies in the hole, it could be taken out using two pliers. Examine how close the Screw’s head is positioned inside the hole. Do you see any gaps between the surface of the Screw and the screws?

    If yes, apply the locking pliers to grasp your Screw’s head. If you can grab the Screw, you may begin turning it before screwing it through the hole. It takes a bit of time and elbow grease. However, it is exceptionally effective under the proper circumstances.

    You can drill a hole into the Screw.

    There is a chance you’re wondering how making through the Screw that is stripped will aid in removing it. However, often the tiny hole is enough to allow the screwdriver more grip. It is necessary to use a drill specifically designed for metal and precautions. You shouldn’t go too deep into the stripped Screw, or it could break off the top.

    Purchase an Extractor Kit for Screws

    When it’s called an extractor kit, it’s a set made up of drill bits with two ends. They are designed especially for this purpose. One end allows drilling into the upper part of the Screw stripped to form an opening. All you need do is change the drill to the removal portion and then move the exercise backwards to release the Screw. It’s convenient but only helpful if you already possess one. They are affordable and valuable additions to your toolkit.

    Make use of a particular product

    You can believe (or you might not) there’s a particular product that can be used for almost everything nowadays. The process of removing the stripped Screw isn’t an issue with liquid products like Screw Grab, DriveGrip, and other products that can be an excellent tool to keep in your bag in case you’re a DIY fan. Typically, a liquid is applied to the Screw to increase grip and abrasion between the screwhead and screwdriver. They are well on screws that haven’t been stripped completely. Essentially, it’s the idea of using a rubber-metal band or steel wool.

    Final Reflections

    Removal of a damaged screw is an essential skill, something you could efficiently perform while working on various DIY projects. But you should know that removing a stripped screw can take a while. Be patient during the removal process, or you could damage the project.

    With these suggestions and tricks, the next time you remove a screw, you can be assured that it’s nothing to worry about. It’s simply another easily solved but frustrating issue. It’s a variety of methods that will work each time. There may be a need for several methods for removing the Screw. Be careful not to overdo any one approach, and you’ll risk tearing the Screw further. Once you’ve figured out the best way to get rid of an untidy screw and become comfortable with all the possibilities available, You’ll eventually learn to identify which situations need a specific approach.

    Leave a Reply

    Your email address will not be published. Required fields are marked *