Do you also have an issue where your screen periodically goes black and is restored automatically on its own after a few minutes? If yes, you’re not the only person who has experienced this issue. I’ve had this problem many times when my monitor would go completely black for a moment, but then it would perform as usual.
The issue is more frequent when you are a Windows user. However, the case source may be more complex than operating system malfunctions, which we’ll discuss in this article. The primary issue with the problem is that it is difficult to identify what’s wrong since you don’t receive any error message displayed on the screen.
In this article, we have listed the causes that can cause your computer’s or laptop’s screen to turn black in a flash, along with every possible solution so you can get rid of the frightful black screen.
How to Stop a Computer Screen From Going Black?
Examine your settings to determine whether you’re using a power plan that shuts down the display. If the computer cannot detect movement or usage for a long time, it will shut down the shows, even if it has the hard drives in. You can alter your power plan settings to shut off the display or select a power plan that doesn’t have this feature.
The black screen with multiple monitors of death
Random black screen problems often plague multiple monitors connected to their computers due to connectivity and display problems.
There is a problem with the detection process, and the screens go out of sync because the GPU does not know which screen should receive which screen or if the quality or damaged cable connecting one of the screens can cause some random chaos.
Another possible reason is an issue in the driver for the graphics card or the components or the hardware.
Causes Of Black Desktop Screen Problems In Windows 10
There’s a good chance you’ve heard of”The black screen that dies which is common to all operating systems. It usually occurs when you switch on your computer only to see blank black screens.
The primary causes of black screens on desktops Windows 10 problems are a damaged screen, a bad video card, or a poor connection.
Another reason is the possibility of a corrupted system file that manifests as blinking prompts, an unresponsive screen either due to a malfunctioning screen adapter, or your computer has crashed due to an issue with your motherboard.
Connect an External Monitor to Test the Display
The screen may be dark if there’s a damaged graphics driver or an issue with the backlight on the LCD. To check the display, connect an external monitor, then restart your computer. This test can be helpful if the screen is black, but you can hear the computer is running. Many monitors and other display devices, such as projectors, can be connected by VGA, DVI, HDMI, and DisplayPort cables.
Step 1. Set up an external display to connect to the laptop.
Learn about your device’s and computer’s video connectors to avoid any issues and enjoy the highest quality possible image.
An HDMI connection is also able to transmit audio. HDMI audio is unavailable with a DVI, HDMI adapter, or cable. It is not possible to connect DVI-D to VGA.
Step 2. If the screen of your computer doesn’t display on the external monitor, hold “F4” until the screen image is displayed.
Step 3. An image on an external monitor could be due to a conflict between the graphics driver and the laptop’s LCD display. Install and download the latest chipset and graphics drivers for the specific laptop.
Step 4. If you hear any operation noises, but there isn’t any image visible on either screen, You can change the monitor or send your laptop to be repaired.
A Black Screen After Windows 10 Update
In Windows 10 systems, a Black Screen of Death can result from an incomplete Windows Update.
What usually happens typically happens is the computer is rebooted in the course of updating, which is followed by a login screen. But, once you’ve entered your password, you’ll notice that the Windows 10 PC is stuck with a black screen upon login.
The mouse responds; there are some desktop icons but no taskbar. It’s a resounding no. Windows 10 is stuck with an all-black screen.
To fix this issue, hold the power button on your laptop or computer to turn it off your computer. A cold boot should ensure that the system is booting correctly. If not, you can check our suggestions for how to restore Windows 10.
Changing Power Settings
Settings for Power Settings are the essential protocol or rule that dictates to computers how much power to use and when it is best to save it. These settings can be set to an amount that is incompatible with your computer or may conflict with the motherboard. In this example, we will go to the power settings via the motherboard and then change the settings.
Use Windows + R to launch the Run application. You can type “control panel” in the dialogue box and hit Enter. This will start the control panel on your computer. Be sure View By: is set to tiny icons at the top right of your screen.
When you are in your control panel, select Power Options.
You will be able to see the power mode currently being used. If it’s set to Power saver, you can change it to High performance or Balanced.
If you’ve previously changed some internal settings for the plan, select Change plan settings and then choose to Restore the default settings for the project you are currently on.
Save any changes you make and close the program. Restart your PC and verify whether the issue has been resolved.
Use A Flashlight
Modern LCD monitors comprise two major components: a Liquid Crystal Display (LCD), which produces images, and a backlight that lights the photos. Modern LCDs have a backlight. The light source is typically made up of a Light-Emitting diode (LED) that can last hundreds of hours; however, often, they fail in the middle of the night (especially when you own a laptop that you regularly use frequently).
It’s almost impossible to repair an LCD at less than the price of a new LCD. However, you (or a repair shop) can improve the backlight if that’s all that’s broken. How do you figure out the problem? Make use of the flashlight.
Switch on your computer and monitor, and then wait for them to start. Take the brightest flashlight and hold it in front of the monitor at an upward angle (so the glare doesn’t strike your face directly). If you can discern the image (such as the desktop), the LCD screen is working; however, the backlight is damaged. Take your laptop to a repair facility to repair your computer’s black screen.
It may be expected and normal.
You probably know this already, but I’ll mention that it’s possible to be an effective screen saver. When you move your mouse or click on your keyboard and the screen returns, that’s it. The screen-saver’s behaviour can be adjusted by using the Settings application.
If you own a laptop, it’s likely that it has entered standby mode or is in hibernate. If you press the power button, and it returns to the place you were within a couple of minutes, it’s likely that. A computer is designed to be on standby when you’re not using it. However, if your battery is low, it could call for standby to prevent losing work. Most of the time, you’ll receive a message which informs you that this is happening.
Why Is My Computer Screen Black With a Cursor?
It could be due to numerous issues, including obsolete drivers or BIOS problems. You can try restarting the computer by pressing Windows keys + R to open Device Manager to upgrade your drivers and restarting your computer in safe mode so that it can start System File Checker.
All the options to fix the laptop’s black screen are presented to you. If your screen appears black randomly, use the solutions above to resolve the issue.
However, first, you must use MiniTool ShadowMaker to back up essential data files, as the black screen that appears randomly could cause data loss because of all possible reasons that could cause your laptop to start becoming black.